SK602

Wireless Safety Alert DRIVE WAY MONITOR / ALARM

  • Wireless motion sensor & receiver up to 160 feet (50 meters)
  • Sensor detects motion and triggers alarm or chime
  • No wiring, easy to install
  • Water resistant wireless sensor
  • Monitor activity around a pool, driveway & backyard
  • Three "C" batteries and 1 9V battery included
  • Warning sticker included
  • For an expandable system choose SK615 & SK632
  • Alarm sounds for 25 seconds and only repeats if motion is still detected. Will reset after detection.
  • No delay: Signal sent from motion sensor to alert immediately.
  • More...

Packing Information

Units per Package:
Units per Carton:
Unit UPC:
I2of5 Barcode:
1
2
056947 60002-5
10056947 60002-2

Unit Information

Unit size:
cm:
inch:
8.26 X 19.69 X 26.67
3.25 X 7.75 X 10.5
Unit weight:
Kg:
lbs:
0.58
1.28

Carton Information

Carton size:
cm:
inch:
20.32 X 13.4 X 27.94
7.5 X 6 X 10
Carton weight:
kg:
lbs:
1.25
2.75

Can additional motion sensors be added to the SK602, like the SK615?

Sorry, no. The motion sensor in the SK602 is not the same kind as in the SK615. The sensor in the SK623 can work with our SK615, as can the SK622. There are channel numbers on the back of the packaging for the SK602. If someone wants to add more motion sensors to their SK602, they have to find another SK602 with the SAME channel and use the motion sensor portion only.

What is the alarm cycle for the SK602?

When motion is detected, alarm will sound for 25 seconds, and LEDs will flash for 25 seconds. Alarm and flash will repeat when ever motion is detected. As often as motion is present. When motion is not present, there will not be alarm or flash.

What is the range for the motion detector in the SK602?

The receiving range is 400 ft (122m). The detection range is 26 ft (8m). The angle is around the 30 degree range to reduce false alarms for this application. Normal motion sensors for security are 110 degrees.

Will the receiver work with an adapter? What kind of adapter. Where can I buy one?

The alert will work on all three conditions: battery alone, battery + 6VDC adaptor, and 6VDC adaptor alone. If plug size is good (OD5.5mm, ID2.1mm, Length 12mm) then check polarity of the plug. The inside is positive; outside is negative as shown on the side of the alert under the receptacle. Check our adapter chart. The Source may have an adapter. We have ordered a small amount also at $8.50, each plus postage.

Can additional motion sensors be added to the SK602, like the SK615?

Sorry, no. The motion sensor in the SK602 is not the same kind as in the SK615. The sensor in the SK623 can work with our SK615, as can the SK622. There are channel numbers on the back of the packaging for the SK602. If someone wants to add more motion sensors to their SK602, they have to find another SK602 with the SAME channel and use the motion sensor portion only.

What is the alarm cycle for the SK602?

When motion is detected, alarm will sound for 25 seconds, and LEDs will flash for 25 seconds. Alarm and flash will repeat when ever motion is detected. As often as motion is present. When motion is not present, there will not be alarm or flash.

What is the range for the motion detector in the SK602?

The receiving range is 400 ft (122m). The detection range is 26 ft (8m). The angle is around the 30 degree range to reduce false alarms for this application. Normal motion sensors for security are 110 degrees.

Will the receiver work with an adapter? What kind of adapter. Where can I buy one?

The alert will work on all three conditions: battery alone, battery + 6VDC adaptor, and 6VDC adaptor alone. If plug size is good (OD5.5mm, ID2.1mm, Length 12mm) then check polarity of the plug. The inside is positive; outside is negative as shown on the side of the alert under the receptacle. Check our adapter chart. The Source may have an adapter. We have ordered a small amount also at $8.50, each plus postage.